Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 11 3000 Service Manual

Procedure

  1. Remove the screw that secures the display-cable bracket to the system board.
  2. Lift the display-cable bracket off the system board.
  3. Peel off the tape to access the display cable.
  4. Open the latch and disconnect the display cable.
    Image: Disconnecting the cables.
    1. screw

    2. display-cable bracket

    3. display cable

    4. tape

    5. latch

  5. Open the latch and disconnect the sensor-board cable from the I/O board.
  6. Remove the antenna cable from the routing guide on the right speaker.
  7. Open the latch and disconnect the I/O-board cable from the system board.
    Image: Disconnecting the cables
    1. latch

    2. sensor-board cable

    3. antenna cable

    4. routing guide

    5. I/O-board cable

    6. latch

  8. Peel the tapes off the display hinges.
    Image: Peeling off the tapes
    1. I/O-board cable

    2. tape

  9. Turn the computer over and open the display as far as possible.
    • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.
    Image: Lifting the display assembly
    1. palm-rest assembly

    2. display assembly

  10. Place the computer face down on a flat surface.
  11. Remove the screws that secure the display assembly to the palmrest and keyboard assembly.
  12. Lift the display assembly off the palmrest and keyboard assembly.
    Image: Removing the display assembly
    1. display assembly

    2. screws (4)

    3. palmrest and keyboard assembly


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\