Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Executes a power action on the chassis or a switch.

To use this subcommand, you must have the Chassis Control Administrator privilege.

Synopsis

Input

• -m < module> — Module on which you want to carry out the action. Values are:
  • chassis - this is the default value, if -m is not specified.
  • switch-n, where n=1 to 2

• < action> — Action that you want to execute on the specified module. Values are:
  • powerdown — (Chassis only) Turns off the chassis.
  • powerup — (Chassis only) Turns on the chassis.
  • powercycle — Power cycles the module.
  • nongraceshutdown — (Chassis only) Non-gracefully turns off the chassis.
  • reset — Performs a hard reset of the module.

When < module > = switch, < action > must be powercycle or reset.

Output

None

Example

Perform a reset of switch-1:

racadm chassisaction -m switch-1 reset

Module power operation successful.