Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Connects to the switch or server serial console.

Synopsis

• racadm connect [-b] —m <module>
• racadm connect [-b] < server-n>
• racadm connect [-b] < switch-n>

Input

-b — Connects to the switch or console using the binary mode. This is an optional argument; a server or a switch must be present.

• server-<n>: where n = 1 to 4
• server —<nx>: where n = 1 to 4 and x = a to d (lower case)
  • NOTE: The values 2 and 4 for n are valid only for multi-node sleds.
• switch-n: where n = 1 to 2 or <a1 | a2>

Examples

• Connect to I/O Module 1 serial console

  racadm connect -m switch-1

• Connect to server 1 serial console

  racadm connect -m server-1