Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FC430 Owner's Manual

Removing the IDSDM card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. If connected, disconnect all USB devices.

  4. If installed, remove the SD card(s).

  5. Remove the SSD cage.

  6. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws securing the IDSDM card to the SSD cage.
  2. Lift the IDSDM card till it disengages from the standoff and slide the IDSDM card away out of the SSD cage.
    CAUTION: To prevent damage to the IDSDM card, you must hold the card only by its edges.
    Figure 1. Removing the IDSDM card
    This figure shows removing the IDSDM card.
    1. screw (2)
    2. screw hole (2)
    3. standoff (1)
    4. SSD cage
    5. IDSDM card

Next steps

  1. Install the SSD cage.
  2. Install the IDSDM card.
  3. If applicable, install the SD cards.
  4. Reconnect any disconnected USB devices.
  5. Follow the procedure listed in the After working inside your system section.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"