- Notes, Cautions, and Warnings
- Introduction
- Preinstallation Setup
- Installing The iDRAC Service Module On Microsoft Windows Operating Systems
- Installing iDRAC Service Module On Supported Linux Operating System
- Installing The iDRAC Service Module on VMware ESXi
- Installing The iDRAC Service Module On Citrix XenServer
- Configuring The iDRAC Service Module
- Frequently Asked Questions
- Linux Installer Packages
iDRAC Service Module 1.0 Installation Guide
Preinstallation Requirement for Linux Operating System
To install the iDRAC Service Module on the systems running the supported Linux operating system, run dcism-setup.sh.
Ensure that the basic functional requirements are met, such as:
- The OS-to-iDRAC Pass-through feature for USBNIC mode is enabled.
- The IPv4 Network stack is enabled in the Host Operating system.
- The USB subsystem is enabled.
For more information, see the Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User’s Guide .
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"