Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

serialuseraccess

Table 1. serialuseraccess options
Option	Sub-option	Valid Arguments	Description	Applicable Systems
`serialuseraccess or sua`			Configures the privilege level and channel accessibility associated with a specified User ID for the serial channel. This option can be replicated.	All PowerEdge systems
	`--userid`	`2–16`, if your system has a DRAC 5 controller	Sets the User ID. This sub-option can be replicated.
	`--usrprivlmt`	`user, operator, administrator,noaccess`	Sets the maximum BMC user privilege level for the serial channel for the User ID specified using the `userid` sub-option. This sub-option can be replicated. This sub-option is dependent on the `userid` sub-option.
	`--currentenableduserids`	NA	Reports the number of currently enabled User IDs on the serial channel. This sub-option can be replicated.
	`--useridswithfixednames`	NA	Reports the number of User IDs with fixed names on the serial channel. This sub-option can be replicated. Example 1 (to enable User ID 2 on the serial channel with administrator privileges ) : A:>syscfg serialuseraccess --userid=2 --usrprivlmt=administrator userid=2 usrprivlmt=administrator status=enable Example 2 (to enable User ID 4 on the serial channel with user privileges ): A:>syscfg serialuseraccess --userid=4 --usrprivlmt=user userid=4 usrprivlmt=user status=enable