Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Global Connection Settings

If you do not use INI files to provide central configuration (global connection settings) to users, you can use the Global Connection Settings dialog box to configure settings that affect all of the connections in your list of connections:

  • Zero Desktop — Click Global Connection Settings in the List of Connections.

  • Classic Desktop — Click Global Connection Settings in the Connect Manager.

To configure the Global Connection Settings:
  1. On the desktop taskbar, click Connect Manager > Global Connection Settings . The Global Connection Settings dialog box is displayed.

  2. Click the Session tab to select the check boxes you want for the options that are available to all sessions. The Smart Card check box specifies the default setting for connecting to a smart card reader at startup.
    • NOTE:

      ICA sessions always have automatic connection to attached smart card readers. When using the Disks check box for automatic connection to connected USB sticks, use the following guidelines:

      • More than one disk can be used at the same time, however, the maximum number of USB sticks including different subareas is 12.

      • Be sure to save all data and sign off from the session mapping the USB stick before removing the USB stick.

    • NOTE:USB devices redirection — By default, audio, video and printer devices will not use HDX USB for redirection. You can make selections for USB device redirection on the Session tab of the Global Connection Settings dialog box.
  3. Click the ICA tab to select the check boxes you want for the options that are available to all ICA sessions. Select the audio quality optimized for your connection. Map to — When a drive is entered, maps a disk under the drive.
  4. Click the RDP and use the following guidelines:

    • Enable or disable Network Level Authentication (NLA)— The NLA authentication method verifies users before they are allowed to connect with a full Remote Desktop connection.

    • Enable or disable ForceSpan— This dual-monitor feature allows you to span the session horizontally across two monitors, thus two monitors acting as one large monitor.

    • Enable or disable Terminal Service multimedia Redirection (TSMM).

    • Enable or disable Record from Local (recording from local microphone).

    • Enable or disable RemoteFX.

    • Select the USB Redirection Type (TCX USB or RDP USB)— TCX USB is the default. To use RDP USB, you must use a RemoteFX session for Windows 7/Windows2008R2 session. However, RDP USB is not supported using a standard Windows 7/Windows2008R2 session. For Windows 8 session and above, RDP USB is supported.

  5. In PCoIP enabled clients, an additional tab named PCoIP is available. Select the USB device redirection type from the drop-down list. The available values are PCoIP USB and TCX USB.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"