Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Removes the current RAID Configuration (Virtual Drives and Hotspares) from the RAID controller. This operation is not data-destructive, but is difficult to reverse.

racadm raid resetconfig:<Controller FQDD> {-current|pending}

• –current <optional>: Performs the configuration right now.
  NOTE If this requires the system to reboot, then the system will reboot.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system reboots.

• racadm raid resetconfig:RAID.ChassisIntegrated.1-1