Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

set controllers


Description	Sets the RAID controllers detected in the system and fault-tolerant mode is configured on external controllers (Shared PERC 8 External).
Synopsis	To enable fault-tolerant mode: Racadm raid set controllers:<FQDD of controller> -p HighAvailabilityMode ha To disable fault-tolerant mode: Racadm raid set controllers:<FQDD of controller> -p HighavailabilityMode none
Input
Example	Racadm raid set controllers:<FQDD of controller> -p HighAvailabilityMode ha racadm raid set controllers:RAID.ChassisSlot.5-1 -p HighAvailabilityMode ha Racadm raid set controllers:<FQDD of controller> -p HighavailabilityMode none racadm raid set controllers:RAID.ChassisSlot.5-1 -p HighAvailabilityMode none