Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

Configuring desktop appliance (Power On to Power Off VDI theme)

We can configure Desktop Appliance using GUI, INI and DHCP. For INI configuration please refer the tags description of DesktopAppliance, CitrixConnectionType, PNAgentServer and Storename INI parameters.

For DHCP configuration, By default, the Desktop Appliance screen is available only in Admin mode. Any changes made through Desktop Appliance screen is saved and continued for the built-in thinuser.
  1. Click the ON/OFF button to enable or disable the VDI theme option after you log in to the session.
  2. From the drop-down list, select your preferred VDI theme.
    • NOTE: Only Citrix theme is supported in this release.
    Figure 1. Desktop Appliance Settings
  3. Select the type of Citrix Server. Citrix server , Protocol and Storename can be configured from Change global settings page. Go to All connections page, select Citrix option and then select Change global settings option to configure the Citrix settings. For more settings for Applications or Desktops, go to All connections page, select Citrix option and then select Change global settings option to configure the Applications or Desktops settings.
  4. Click Save. You are prompted to restart the system.
  5. Click OK to save the changes and restart the system in selected theme.
  6. After the system is restarted, a log on button is displayed.
    1. Click the Log On button.
      Figure 2. Log On Screen
      You are required to authenticate by entering the following credentials:
      • User name
      • Password
      • Domain
      You are logged on to the Citrix receiver.
      Figure 3. Authentication Screen
      If the logon authentication fails, you are prompted with a screen. Click try again to query the server again.
      • NOTE: You can break kiosk mode and enter into admin mode at any point of time by using the short cut key. The short cut key is <Control><Alt><Shift>F11.
    2. After the successful login, you can add the required applications or desktops from the left + button.
    3. Click the application or desktop to start it. You are prompted with an error if there as an error message.
    4. You can logout at any point of time by clicking the power icon on task bar. Depending on whether any application is opened, you are prompted with an error message.
      Figure 4. Log Off Screen
    5. If any applications are running, connection center window is displayed, select each application and either log off or disconnect. Following which click the cross to close the control center and logoff completely.
      • NOTE: If you do not follow above procedure to log off, you may see sessions active and running behind the displayed log on button.
      Figure 5. Citrix Connection Center

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\