Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Gets, sets, and displays the list of event filter settings.

To use this subcommand with the get option, you must have the CMC Login User privilege.

• racadm eventfilters < eventfilters command type>
• racadm eventfilters get -c < alert descriptor>
• racadm eventfilters set -c < alert descriptor>-n < notifications>
• racadm eventfilters set -c < alert descriptor>-r < recurrence>

Valid category values are:

• System
• Config
• Updates
• Audit

Valid severity values are:

• Critical
• Warning
• Informational

Valid examples of alert descriptors are:

• cmc.alert.all

• cmc.alert.audit

• cmc.alert.audit.lic

• cmc.alert.audit.warning

• cmc.alert.audit.lic.critical

• get - Displays the list of event filter settings.
• set - Configures the actions and notifications for a given event filter configuration.
• -c - Alert descriptor of the specific event filter.
• -n - The notification to be sent when the event occurs. Valid values are all, snmp, ipmi, email, or none. You can append multiple notifications separated by a comma. You cannot enter the values all or none with other notifications.
• -r - Event generation interval. This is applicable only to the temperature statistics subcategory - tmps. You can use this option as a stand-alone or with -n .

• Display all available event filter configurations:

  racadm eventfilters get -c cmc.alert.all

• Display eventfilter configurations for a specific category. For example, audit:

  racadm eventfilters get -c cmc.alert.audit

• Display eventfilter configurations for a specific subcategory. For example, licensing under the audit category:

  racadm eventfilters get -c cmc.alert.audit.lic

• Display eventfilter configurations for a specific severity. For example, warning under the audit category:

  racadm eventfilters get -c cmc.alert.audit.warning

• Display eventfilter configurations for a specific severity and subcategory. For example, a severity of warning in the subcategory licensing under audit category:

  racadm eventfilters get -c cmc.alert.audit.lic.warning

• Clear all available alert settings:

  racadm eventfilters set -c cmc.alert.all -n none

• Configure using subcategory as a parameter. For example, all configurations under the licensing subcategory in the audit category are assigned poweroff as action and all notifications are enabled:

  racadm eventfilters set -c cmc.alert.audit.lic -n all

• Configure using subcategory and severity as parameters. For example, all Information events under the licensing subcategory in the audit category are assigned poweroff as action and all notifications are disabled:

    racadm eventfilters set -c cmc.alert.audit.lic.info -n none

• Configure the event generation interval for temperature statistics:

  racadm eventfilters set -c cmc.alert.system.tmps.warning -r 10

• Configure the event generation interval and notifications for temperature statistics:

  racadm eventfilters set -c cmc.alert.system.tmps -r 5 -n snmp