Dell OpenManage SNMP Reference Guide Version 8.2

Trap Variables

This section describes the variables both on Traditional and Enhanced varbinds that are sent to the management console to provide additional information about a trap or alert generated by some event on your system. The trap variables presented here apply to all Instrumentation and RAC traps. Trap variables are sent in the order listed and are reserved for use only in traps. When a varbind is created for a trap variable, a zero is appended to the object ID (OID) to create the OID for the varbind.

The messages associated with each alertMessage varbind are available in the Message Reference Guide and can be found by matching the alert ID in the MIB to the event ID in the Message Reference Guide .

Table 1. Trap Variables
Variable Name	`alertSystem`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.1
Description	Identifies the system generating the alert.
Syntax	DisplayString

Table 2. Table Index OID
Variable Name	`alertTableIndexOID`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.2
Description	Specifies the object identifier for the index attribute in the table that contains the object causing the alert. Uniquely identifies the object causing the alert and can be used to correlate different alerts caused by the same object.
Syntax	OBJECT IDENTIFIER

Table 3. Message
Variable Name	`alertMessage`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.3
Description	Describes the alert.
Syntax	DisplayString

Table 4. Current Status
Variable Name	`alertCurrentStatus`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.4
Description	Specifies the current status of the object causing the alert.
Syntax	DellStatus

Table 5. Previous Status
Variable Name	`alertPreviousStatus`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.5
Description	Specifies the previous status of the object causing the alert.
Syntax	DellStatus

Table 6. Data
Variable Name	`alertData`
Object ID	1.3.6.1.4.1.674.10892.1.5000.10.6
Description	Provides Server Administrator-defined data related to the alert.
Syntax	Octet String

The following variables show the Enhanced varbinds:

Table 7. Message ID
Variable Name	`alertMsgID`
Object ID	1.3.6.1.4.1.674.10892.4.5000.10.7
Description	Specifies the enhanced message ID for the object generating the alert.
Syntax	DisplayString

Table 8. System FQDN
Variable Name	`alertSystemFQDN`
Object ID	1.3.6.1.4.1.674.10892.4.5000.10.8
Description	Specifies fully qualified domain name of the system generating the alert.
Syntax	DisplayString

Table 9. Service Tag
Variable Name	`alertServiceTag`
Object ID	1.3.6.1.4.1.674.10892.4.5000.10.9
Description	Specifies the system service tag of the system generating the alert.
Syntax	DisplayString

Table 10. Chassis Service Tag
Variable Name	`alertChassisServiceTag`
Object ID	1.3.6.1.4.1.674.10892.4.5000.10.10
Description	Specifies the chassis service tag of the system generating the alert.
Syntax	DisplayString

Bienvenue

Bienvenue dans l’univers Dell

Dell OpenManage SNMP Reference Guide Version 8.2

Trap Variables

Évaluez ce contenu