In the CMC web interface, click
Chassis Overview, and then click
Update.
On the
Firmware Update page, in the
CMC Firmware section, select the required components under the
Update Targets column for the CMC or CMCs (if a standby CMC is present) you want to update, and then click
Apply CMC Update.
In the
Firmware Image box, type the path to the firmware image file on the management station or shared network, or click
Browse to browse through to the file location. The default name of the CMC firmware image file is vrtx_cmc.bin.
Click
Begin Firmware Update, and then click
Yes. The
Firmware Update Progress section displays information about the firmware update status.
For more information, see the
Chassis Management Controller for PowerEdge VRTX User's Guide available at the support site.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\