- Notes, cautions, and warnings
- Introduction
- Getting Started:
Quickly Learning the Basics
- Connecting to a Remote Server
- Using Your Desktop
- Configuring Thin Client Settings and Connection Settings
- Connecting to a Printer
- Connecting to a Monitor
- Locking the Thin Client
- Signing Off and Shutting Down
- Additional Getting Started Details
- Classic Desktop Features
- Login Dialog Box Features
- Accessing System Information
- Global Connection Settings
- Configuring the Connectivity
- Configuring Thin Client Settings
- Citrix HDX RealTime Multimedia Engine (RTME)
- Advanced Details on Configuring ICA and RDP Connections
- ICA SuperCodec
- Features of RDP 8.1
- Introduction to Flash Redirection
- Introduction to TCX 7.0 Flash Redirection
- Performing Diagnostics
- Central Configuration: Automating Updates and Configurations
- CMOS Management
- Examples of Common Printing Configurations
- Security Changes
- Transport Layer Security (TLS)
- Important Notes
- Frequently Asked Questions
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide
CMOS Local Management: Extracting CMOS Settings to a USB Key for Distribution
CMOS local
management allows ThinOS administrators to easily manage CMOS settings
for small deployments of thin clients using USB Key distribution methods.
The following instructions are for R10 BIOS version 1.0B_SPC001–0407.
However, the instructions are also applicable for other supported
BIOS versions.
-
To prepare a Reference Drive containing BIOS
version 1.0B_SPC001-0407 or later:
- The Reference Device is a golden image you use to distribute to other thin client devices. To use Reference Drive, enter the BIOS Setup Utility. Press the Delete key, enter the Password — Fireport (case sensitive) and press Enter. Configure the CMOS settings, includes AutoPower, BootOrder, P-key setting, BiosPassword.
- Save your CMOS Settings.
- Restart your thin client device.
-
To extract the CMOS Settings to a USB Key.
- Attach a formatted USB key on the thin client device which you want to use as a Reference Device. For example, to format on Windows 7, attach the USB Key, right-click on the USB key, select Format, click Restore device defaults, select Quick Format, and then click Start.
- Use the Extract CMOS to USB GUI feature of ThinOS to extract the CMOS settings to the USB Key. On Classic Desktop: Right-click the desktop and select Extract CMOS to USB. On Wyse Zero Desktop: In the General tab of the System Tools dialog box ( ), click Extract CMOS to USB.
- Once extraction successful you see a pop-up message: CMOS: extract to R10_cmos.1.0H_SPC), properly eject and detach the USB Key. The CMOS settings on the USB Key are now ready for distribution to other thin clients
-
To restore the CMOS Settings to your Target
devices:
- On all of the target thin clients that you want to distribute the Reference Device CMOS settings, start the thin client.
- Use the Restore CMOS from USB GUI feature of ThinOS to write the CMOS settings from the USB Key to the target thin client: For Classic Desktop: Right-click the desktop and select Restore CMOS from USB. For Wyse Zero Desktop: In the General tab of the System Tools dialog box ( ), click Restore CMOS from USB.
- Once restoration successful you see a pop-up message: CMOS: restore from R10_cmos.1.0H_SPC properly eject and detach the USB Key. The CMOS settings on the USB Key are now written to your target thin client.
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\