Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell Latitude E6540 Owner's Manual

Removing the Heat-Sink Assembly

Steps

  1. Follow the procedures in Before Working Inside your computer.
  2. Remove:
    1. battery
    2. base cover
  3. Disconnect the fan cable and remove the screws that secure the heat-sink assembly to the system board.
    Figure displaying how to remove the fan cable and remove the screws that secure the heat-sink assembly to the system board.
  4. Perform the following steps as shown in the illustration:
    1. Slide the heat-sink assembly.
    2. Lift the heat-sink assembly from the computer.
    Figure displaying how to remove the heat-sink assembly from the system.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\