메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the General Display Settings

To configure the general display settings:
  1. From the desktop menu, click System Setup, and then click Display. The Display dialog box is displayed.
  2. Click the General tab, and use the following guidelines:
    1. Select best display setting on DDC monitor—If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows the thin client to automatically select the best resolution and refresh rate.

      If your monitor is not DDC compatible, then Monitor does not support Plug and Play message is displayed. Click OK to acknowledge the message and remove it from the screen.

    2. DDC table— If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows you to select the resolution and refresh rate you want from the list.
    3. User defined display setting— Select this option and select the resolution and refresh rate supported by your monitor. All combinations are allowed. Resolutions include:

      640 x 480 (not on T10D)

      800 x 600 (not on T10D)

      1024 x 768

      1152 x 864

      1280 x 720

      1280 x 768 (not on T10)

      1280 x 1024

      1360 x 768 (not on T class)

      1366 x 768

      1368 x 768 (not on T class)

      1400 x 1050

      1440 x 900

      1600 x 900

      1600 x 1200

      1680 x 1050

      1920 x 1080

      1920 x 1200

      1920 x 1440 (R class only)

      2560 x 1080 (Single monitor only; R class and D/Z class only)

      2560 x 1440 (Single monitor only; R class and D/Z class only)

      2560 x 1600 (Single monitor only; R class and D/Z class only)

      3840 x 2160 (Single monitor only; D/Z class only)

      Refresh rate list selections include:

      60 Hz (default)

      75 Hz

      85 Hz

    4. Rotation —Select a rotation option; either None, Left turn 90 degrees, or Right turn 90 degrees .
    5. Desktop Color— Only 32 bit is permitted from ThinOS 8.2. This value is selected by default.
    6. Usage Help — This section contains brief instructions for using the Display dialog box and running the test. No operator entry can be made in this box.

      Make note of the instructions in the area, regarding v-key reset usage in case of display failure.

  3. Click OK to save the settings.

Dual 4K (3840x2160) support

The following are the list of tested monitor resolutions supported for Wyse 5060 thin client:

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 720

1280 x 768

1280 x 1024

1360 x 768

1366 x 768

1368 x 768

1400 x 1050

1440 x 900

1600 x 900

1600 x 1200

1680 x 1050

1920 x 1080

1920 x 1200

2560 x 1080

2560 x 1440

2560 x 1600

3440 x 1440

3840 x 2160

Dual 3840 x 2160 is supported with Dual Display ports for 30 Hz display refresh rate.

The following are the tested Dell monitors supporting dual 3840 x 2160 resolution:

Dell P2815Q (3840 x 2160)

Dell UP3216Q (3840 x 2160)

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.