메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Setting the Time and Date

To configure the Time and Date settings:
  1. From the desktop menu, click the System Setup , and then click System Preferences. The System Preference dialog box is displayed.
  2. Click the Time/Date tab, and use the following guidelines:
    1. Time Zone— Select a time zone where the thin client operates from the drop-down list. Default value is Unspecified.
    2. Enable Daylight Saving— Allows you to enable the daylight saving settings. When selected, the Start Date and End Date boxes must be properly configured to define the daylight saving starting (month/week/day) and ending (month/week/day) periods.
      Use the following guidelines to enter the Start date and End date:

      • Month— Specifies the month in the year from January through December.

      • Week— Select 1 through 4 for the week in the month. Week last denotes the last week in the month.

      • Day — Specifies the day of the week from Monday through Sunday.

    3. Time Format — Allows you to select a 12 or 24-hour time format. default is 24-hour format.
    4. Date Format — Allows you to select a yyyy/mm/dd (year/month/day) or dd/mm/yyyy (day/month/year) date format. Default is yyyy/mm/dd.
    5. Time Servers — List of IP addresses or host names with optional TCP port number of Time Servers.

      Each entry with optional port number is specified as Name-or-IP: port, where: port is optional. If not specified, port 80 is used. Locations can be supplied through user profiles if user profiles are used. The Time Servers provide the thin client time based on the settings of time zone and daylight saving information. If DHCP is used, locations can be supplied through DHCP.

    6. Change Date and Time — Allows you to change date and time for secure environments requiring a solution to outside server access. When connecting to a file server over HTTPS, the proper time must be defined on the thin client for SSL/ certification validation.
  3. Click OK to save the settings.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.