Przejdź do głównej zawartości
Wyloguj

Witamy w firmie Dell

Moje konto
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów
  • Na firmowej stronie administracji możesz zarządzać witrynami, produktami i danymi kontaktowymi firmy Dell EMC.
Zaloguj się Utwórz konto Witryna Premier — logowanie Logowanie w programie dla partnerów
Kontakt

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

Directing the Thin Client to the Server

After you set up the folder structure and populate it with the correct files, direct the thin client to the location of the server by the following way:

  • DHCP

  • IMPORTANT: We recommend you use DHCP to direct the thin client to Server.

To direct the thin client to the server:

Using DHCP — When using DHCP to direct the thin client to the location of the server, information about the server and root directory is obtained from the following DHCP options:
  1. 161 — The server.
  2. 162 — Root path to the server-ftp/http/https.

    • If no root path is defined, /wyse is assumed

    • If a root path is defined, the additional path will be appended to the URL supplied by option 161.

  3. 184 — Server username to the server specified in option 161. This is optional.
  4. 185 — Server password to the server specified in option 161. This is optional.
  • IMPORTANT:

    Check-in for firmware updates is done early in the boot process. For that reason, changes in DHCP information may not be propagated to a unit until a full boot is completed. However, you can avoid this by forcing a renewing of the DHCP lease, which makes sure that the unit has the latest file-server location before the next firmware check.

    Simply, right-click the Network Manager icon, click Enable Networking to disable it, right-click the Wireless Manager icon, and then click Enable Networking to enable it again and the DHCP lease is renewed.

For general instructions on adding DHCP Options #161 and #162 , see Knowledge Base Solution # 16132, go to www.dell.com/wyse/knowledgebase and search for 16132.

After you start your thin client, the device will look in the defined root path for the latest available image and update if necessary. Additionally, it will check the directory file in the addons folder to see if any updates for installed add-ons are defined. Add-ons that exist in the addons folder but are not listed in the directory file, will be ignored during update check-in.

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\