Installing a
hot swappable hard drive into a hot swappable hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized
in your product documentation, or as directed by the online or telephone
service and support team. Damage due to servicing that is not authorized
by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: Hot swappable
hard drives are supplied in hot swappable hard drive carriers that
fit in the hard drive slots.
Keep the Phillips #2 screwdriver
ready.
Remove the
hot swappable hard drive carrier.
Steps
Insert the hot swappable hard drive into the hard drive carrier with
the connector end of the hard drive toward the back.
Align the screw holes on the hard drive with the set of screw holes
on the hard drive carrier.
When aligned correctly, the back of the hard drive
is flush with the back of the hard drive carrier.
Attach the screws to secure the hard drive to the hard drive carrier.
Next steps
Install the hard drive carrier into the system.Figure 1. Installing a
hot swappable hard drive into a hot swappable hard drive carrier
screw (4)
hard drive
hard drive carrier
Data não disponível para o tópico
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\
