Avançar para o conteúdo principal
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.

Dell PowerEdge R330 Owner's Manual

Removing a cabled hard drive from a hard drive carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Ensure that you follow the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the cabled hard drive carrier.
  4. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws from the side of the cabled hard drive carrier.
  2. Remove the hard drive from the hard drive carrier.
    Figure 1. Removing a cabled hard drive from a cabled hard drive carrier
    This figure shows removing a cabled hard drive from a cabled hard drive carrier.
    1. screw (4)
    2. cabled hard drive
    3. cabled hard drive carrier

Next steps

  1. Install the cabled hard drive in the hard drive carrier.
  2. Install the hard drive carrier into the slot.
  3. Follow the procedure listed in After working inside your system.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\