Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

-noraidprompt*

Option	`--noraidprompt*` NOTE: The asterisk is not part of the command syntax.
Valid Arguments	NA
Description	Specifies that the BIOS must not prompt for confirmation when changing the mode of a RAID controller. This option can only be used with the --embscsiraid or --embscsiraidchb options. Without this option, the user is prompted during POST to confirm the change of a RAID controller from RAID (SCSI) to SCSI (RAID). This option is not replicated. CAUTION: When changing a RAID controller from SCSI to RAID or from RAID to SCSI, data is lost on the affected hard drives. The warning message for this data is not displayed if you use the --noraidprompt option. To avoid data loss, back up any information on the hard drives before changing the type of controller used with the drives Example: A:>syscfg --embscsiraid=raid --noraidprompt embscsiraid=raid
Applicable Systems	All PowerEdge systems prior to PowerEdge 12G systems.