Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

BMC Platform Events Filter Alert Messages

All possible Platform Event Filter (PEF) Alert Messages along with a description of each event are listed in the table below

Table 1. BMC PEF Alert Events
Event	Description
`Fan Probe Failure`	The fan is running too slow or not at all.
`Voltage Probe Failure`	The voltage is too low for proper operation.
`Discrete Voltage Probe Failure`	The voltage is too low for proper operation.
`Temperature Probe Warning`	The temperature is approaching excessively high or low limits.
`Temperature Probe Failure`	The temperature is either too high or too low for proper operation.
`Chassis Intrusion Detected`	The system chassis has been opened.
`Redundancy (PS or Fan) Degraded`	Redundancy for the fans and/or power supplies has been reduced.
`Redundancy (PS or Fan) Lost`	No redundancy remains for the system's fans and/or power supplies.
`Processor Warning`	A processor is running at less than peak performance or speed.
`Processor Failure`	A processor has failed.
`PPS/VRM/DCtoDC Warning`	The power supply, voltage regulator module, or DC-to-DC converter is pending a failure condition.
`Power Supply/VRM/D2D Failure`	The power supply, voltage regulator module, or DC-to-DC converter has failed.
`Hardware log is full or emptied`	Either an empty or a full hardware log requires administrator attention.
`Automatic System Recovery`	The system is hung or is not responding and is taking an action configured by Automatic System Recovery.
`System Power Probe Warning`	The system is setting actions when a power consumption probe detects a warning value.
`System Power Probe Failure`	The system is setting actions when a power consumption probe detects a failure value.