Dell OpenManage Server Administrator Version 7.3 User's Guide

Configuring Your System To Send SNMP Traps To A Management Station

Server Administrator generates SNMP traps in response to changes in the status of sensors and other monitored parameters. You must configure one or more trap destinations on the system running Server Administrator for SNMP traps to be sent to a management station.

Open the Computer Management window.
Expand the Computer Management icon in the window, if necessary.
Expand the Services and Applications icon and click Services.
Scroll down the list of services until you find SNMP Service, right-click SNMP Service , and then click Properties.
The SNMP Service Properties window appears.
Click the Traps tab to add a community for traps or to add a trap destination for a trap community.
1. To add a community for traps, type the community name in the Community Name box and click Add to list, which is located next to the Community Name box.
2. To add a trap destination for a trap community, select the community name from the Community Name drop-down box and click Add under the Trap Destinations box.
  The SNMP Service Configuration window appears.
3. In the Host name, IP or IPX address box, type the trap destination, Add.
  The SNMP Service Properties window appears.
Click OK to save the changes.

Добро пожаловать

Добро пожаловать в Dell

Dell OpenManage Server Administrator Version 7.3 User's Guide

Configuring Your System To Send SNMP Traps To A Management Station

Оценить этот контент