- Notes, Cautions, and Warnings
- Copyright
- Introduction
- Preinstallation Setup
- Installing Managed
System Software On Supported Linux And VMware ESX
- Software License Agreement
- RPM For Individual Components
- OpenIPMI Device Driver
- Installing Managed System Software
- Uninstalling Managed System Software
- Installing Systems
Management Software On VMware ESXi
- Using The vSphere CLI
- Using The VMware vSphere Management Assistant (vMA)
- Using The VMware Update Manager (VUM)
- Using The Power CLI
- Accessing Server Administrator on VMware ESXi
- Enabling Server Administrator Services On The Managed System
- Configuring The SNMP Agent On Systems Running VMware ESXi
- Troubleshooting
- Frequently Asked Questions
- Linux Installer Packages
Vitajte
Vitajte v spoločnosti Dell!
Moje konto
- Zadávajte objednávky rýchlo a jednoducho
- Pozrite si svoje objednávky a sledujte priebeh doručenia
- Vytvorte si zoznam svojich produktov a majte ho vždy poruke
- Spravujte svoje lokality Dell EMC, produkty a kontaktné informácie na úrovni produktov pomocou Správy informácií o spoločnosti.
Server Administrator Version 7.4 Installation Guide
Configuring The SNMP Agent On Systems Running VMware ESXi
Server Administrator generates Simple Network Management Protocol (SNMP) traps in response to changes in the status of sensors and other monitored parameters. You must configure one or more trap destinations on the system running Server Administrator to send SNMP traps to a management station.
Server Administrator supports SNMP traps on VMware ESXi but does
not support SNMP Get and Set operations because VMware ESXi does not
provide the required SNMP support. You can use the VMware vSphere
CLI to configure VMware ESXi to send SNMP traps to a management application.
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
Vyberte, prosím, či vám článok pomohol alebo nie.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\