Preskočiť na hlavný obsah
  • Zadávajte objednávky rýchlo a jednoducho
  • Pozrite si svoje objednávky a sledujte priebeh doručenia
  • Vytvorte si zoznam svojich produktov a majte ho vždy poruke
  • Spravujte svoje lokality Dell EMC, produkty a kontaktné informácie na úrovni produktov pomocou Správy informácií o spoločnosti.

Server Administrator Version 7.4 Installation Guide

Using The VMware vSphere Management Assistant (vMA)

The vMA allows administrators and developers to run scripts and agents to manage ESX/ESXi systems. For more information on vMA, see vmware.com/support/developer/vima/.
  1. Log on to vMA as an administrator and provide the password when prompted.
  2. Copy and unzip the OM-SrvAdmin-Dell-Web-<version>-<bldno>.VIB-ESX<version>i_<bld-revno>.zip file to a directory on the vMA.
  3. Shut down all guest operating systems on the ESXi host and put the ESXi host in maintenance mode.
  4. In vMA, execute the following command: For VMware ESXi4.0/ESXi 4.1: vihostupdate --server < IP address of ESXi Host> -i -b < path to Dell OpenManage file > For VMware ESXi 5.0 U1: esxcli --server < IP Address of ESXi 5.0 host > software vib install -d /var/log/vmware/< Dell OpenManage file>
  5. Enter the root username and password of the ESXi host when prompted. The command output displays a successful or a failed update.
  6. Restart the ESXi host system.
When you run the command, the following components are installed on the system:
  • Server Administrator Instrumentation Service
  • Remote Enablement
  • Server Administrator Storage Management
  • Remote Access Controller

Install the Server Administrator Web Server separately on a management station.

After installing Server Administrator, enable the Server Administrator Services.


Ohodnotiť tento obsah

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
0/3000 characters
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, hodnotenie (1 až 5 hviezdičiek).
  Vyberte, prosím, či vám článok pomohol alebo nie.
  Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\