Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

closessn

Description	Closes a communication session on the device. Use getssninfo to view a list of sessions that can be closed using this command. To run this subcommand, you must have the Administrator permission NOTE: This subcommand ends all the sessions other than the current session.
Synopsis	`racadm closessn –i <session_ID>` `racadm closessn -a` `racadm closessn -u <username>`
Input	`—i <session_ID>` — The session ID of the session to close, which can be retrieved using RACADM `getssninfo` subcommand. Session running this command cannot be closed. `—a` — Closes all sessions. `—u <username>` — Close all sessions for a particular username. `—u` option can be used in local RACADM only if the username contains up to 16 characters. If the user name contains more than 16 characters, use -i option.
Output	Successful or error message is displayed.
Example	Closes the session 1234. `racadm closessn -i 1234` Closes all the sessions other then the active session for root user. `racadm closessn –u root` Closes all the sessions. `racadm closessn –a`