Configuring
Static IP Address in the Virtual Appliance
In VMware Sphere, click the
Console tab to open the console of the virtual appliance or use the SSH
protocol to connect to ASM virtual appliance IP (ssh needs to be enabled
on the appliance).
Log in to the console with the user name
delladmin, enter current password, and then press
Enter.
NOTE: The default password for
delladmin account is
delladmin.
At the command line interface, run the command
asm_init_shell.
In the Appliance Configuration dialog box,
click
Network Configuration.
In the
Network Connections dialog box, click
Wired →
Auto
eth0
, and then click
Edit.
In the
Editing Auto eth0 dialog box, click
IPv4 Settings tab.
Select
Manual from
the
Method drop-down list.
In the
Addresses table,
type the static IP address, subnet mask, gateway, and then click
Add.
Click
Apply to set the
static IP address of the appliance.