The following
table describes the prerequisites for the FCoE solution offered using
M1000e (with MXL and FC FlexIOM), Brocade, and Dell Compellent. For
more information, see http://en.community.dell.com/techcenter/extras/m/white_papers/20387203
Resource |
Prerequisites |
MXL |
-
DCB needs to be enabled.
-
VLT needs to be disabled.
-
FC feature needs to be enabled on the MXL. Remove “fip-snooping”
feature if enabled on the MXL.
conf
feature fc
-
Port-channel member interfaces needs to have following configuration.
interface range tengigabitethernet 0/33 – 36
port-channel-protocol lacp
port-channel 128 mode active
exit
protocol lldp
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shut
exit
-
Server facing ports needs to have following configuration.
portmode hybrid
switchport
protocol lldp
dcbx port-role auto-downstream
no shut
exit
|
Brocade |
Alias needs to be created having Dell Compellent fault domain
WWPN accessible on Brocade switch.
|
Dell Compellent |
Create fault domain as per Dell Compellent best practices.
|