跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。

Dell FluidFS Version 6.0 FS8600 Appliance Pre-Deployment Requirements

PDF

SAN Configuration

Make sure that Storage Center software and Dell Storage Manager software are installed and satisfy the deployment prerequisites.

Prerequisite
The Storage Center systems are running the required version of Storage Center software:
  • An SC9000 storage system requires Storage Center 6.7.3 or later.
  • An SC8000 storage system requires Storage Center 6.5.10 or later.
  • An SC7020 storage system requires Storage Center 7.1.4 or later.
  • An SC40 storage system requires Storage Center 6.5.10 or later.
  • An SC4020 storage system requires Storage Center 6.5.10 or later.
  • An SCv2080 storage system requires Storage Center 6.6.4 or later.
  • NOTE: A single FluidFS cluster supports up to eight Storage Centers.
  • For deployment instructions, see the Dell Storage Center Deployment Guide.
  • For upgrade instructions, see the Dell Storage Center Software Update Guide.
Each Storage Center certificate contains the host name or management IP address used to add the Storage Center to Dell Storage Manager. For instructions on regenerating an SSL certificate, see the Storage Center Administrator's Guide.
(Optional) Storage Centers can be reached by Copilot through Secure Console to assist with troubleshooting.
Dell Storage Manager 2016 R3 or later software is installed and configured.
  • NOTE: Dell recommends using the latest version of Dell Storage Manager software.
See the Dell Storage Manager Installation Guide for detailed instructions.
The Storage Center systems are added to Dell Storage Manager.
Dell Storage Manager can successfully send data to Dell Technical Support using SupportAssist.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\