solcfgparams
|
|
|
Configures and displays SOL configuration parameters. This
option can be replicated.
|
All PowerEdge systems |
|
--solenable
|
enable, disable
|
Enables or disables if the SOL payload type can be activated.
This option can be replicated.
|
|
|
--solprivlevel
|
user, operator, administrator
|
Sets the minimum user privilege level required to activate
the SOL. This option can be replicated.
|
|
|
--solcharaccuminterval
|
1–255
|
Sets the Character Accumulate Interval in 5–ms increments (1–255).
This sets the typical amount of time that the BMC waits before transmitting
a partial SOL character data packet. This option can be replicated.
|
|
|
--solcharsendthreshold
|
1–255
|
Specifies that the BMC automatically sends an SOL character
data packet containing this number of characters in increments of
5 (1–255) as soon as this number of characters (or greater) has been
accepted from the baseboard serial controller into the BMC. This option
can be replicated.
-
NOTE: On PowerEdge 9G and SC1435 systems, the maximum limit is 255.
|
|
|
--solbitrate
|
9600, 19200, 57600, 115200
|
Sets the serial channel communication bit rate (in bps)
with the BMC when SOL is activated. This option can be replicated.
-
NOTE: The arguments for
solbitrate vary with various Dell systems. If an argument
valid for a particular Dell system is entered for another system,
the
Parameter out of range error is displayed.
Valid arguments are:
- 57600 — for PowerEdge 9G systems that do not have DRAC 5 installed.
- 115200 — for PowerEdge 9G systems that have DRAC 5 installed.
Example 1 (to display the current SOL configuration):
A:>syscfg solcfgparams
solcfgparams solenable=enable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=25
solbitrate=9600
Example 2 (to set the SOL configuration
parameters):
A:>syscfg solcfgparams
--solenable=disable
--solprivlevel=administrator
--solcharaccum interval=25
--solcharsend threshold=100
--solbitrate=9600 solcfgparams solenable=disable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=100
solbitrate=9600
|
|