|

Dell PowerEdge M I/O Aggregator

intel core
Buy more. Save more. Do more.
For PCs over $499: Save an extra 5% for up to 35% off when buying two PCs and save an extra 10% for up to 40% off when buying three or more PCs. Shop Now ›

Consolidate your network

Simplify network management and increase server bandwidth with the PowerEdge™ M I/O Aggregator, enabling easy, plug-and-play data center convergence.

Call for Pricing
 

 

Port Attributes

  • 4 optional FlexIO plug-in modules giving flexible media choices:
        - 2 port QSFP+ module (in 4x10GbE breakout mode)
        - 4-port SFP+ 10GbE module
        - 4-port 10GBase-T 10GbE copper module (1/10GB, only 1 module of this type is supported per IOA
        - 4-port Fibre Channel module (2/4/8G)

    Native 40GbE is supported when IOA is in Manual Mode
    1 USB (Type A) port for storage
    1 USB (Type A) port for console/management

Performance

  • MAC addresses: 128K
    IPv4 routes: 16K
    Switch fabric capacity: 1.28 Tbps (full-duplex)
    Forwarding capacity: 960 Mpps
    Link aggregation: Up to 16 members per group, 128 LAG groups
    Queues per port: 4 queues
    VLANs: 4094
    Line-rate Layer 2 switching: All protocols, including IPv4
    Packet buffer memory: 9MB
    CPU memory: 2GB

    Stacking

    Stacked units: Up to 6 IOAs (using fixed 40GbE ports only and deployed via CLI)
    Stacking bandwidth: Up to 160Gbps (using 1 x 40GbE ring)
    Stacking topology: Ring and daisy chain

     

    Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)

    IEEE compliance

    802.1AB LLDP
    802.1p L2 Prioritization
    802.3ab Gigabit Ethernet (1000Base-T)
    802.3ad Link Aggregation with LACP
    802.3ae 10GbE (10GBase-X)
    802.3ba 40GbE (40GBase-SR4, 40GBase-CR4) on optical ports in manual mode
    802.3u Fast Ethernet (100Base-TX)
    802.3x Flow Control
    802.3z Gigabit Ethernet (1000Base-X)
    ANSI/TIA-1057 LLDP-MED
    MTU 12KB

Storage

  • DCB
    DCBx
    iSCSI
    FIP snooping

VLAN

  • 802.1Q VLAN Tagging
    802.3ac Frame Extensions for VLAN Tagging
    Native VLAN

    Data center bridging

    IEEE 802.1Qbb Priority-Based Flow Contrl (PFC)
    IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
    Data Center Bridging eXchange (DCBx)
    DCBx Application TLV (iSCSI, FCoE)

    Fiber channel

    NPIV Proxy Gateway (NPG)
    Fiber Channel port types : N
    Bridging to FC SAN
    1 FCoE_Maps per IOM
    FCoE features
    Native FCoE forwarding
    FCoE Initialization Protocol (FIP) v1
    FCoE Transit (FIP Snooping Bridge)
    FCoE to FC Forwarding
    Dynamic FCoE to FC Load Balancing

Security

  • 854 Telnet
    959 FTP
    1350 TFTP
    2856 RADIUS
    3164 Syslog
    4254 SSHv2
    TACACS+

     

    General IPv4 protocols

    768 UDP
    791 IPv4
    792 ICMP
    793 TCP
    826 ARP
    1042 Ethernet Transmission
    1305 NTPv3
    1519 CIDR
    2131 DHCP (client)
    3021 31-bit Prefixes
    3128 Tiny Fragment Attack Protection

    General IPv6 protocols

    4861 IPv6 Host for management port

    Multicast

    4541 IGMPv1/v2 Snooping

Management

  • 1155 SMIv1
    1156 Internet MIB
    1157 SNMPv1
    1212 Concise MIB Definitions
    1493 Bridges MIB
    1901 Community-based SNMPv2 (read only)
    2011 IP MIB
    2012 TCP MIB
    2013 UDP MIB
    2571 Management Frameworks
    2572 Message Processing and Dispatching
    2576 Coexistence Between SNMPv1/v2
    2578 SMIv2
    2579 Textual Conventions for SMIv2
    2580 Conformance Statements for SMIv2
    2665 Ethernet-like Interfaces MIB
    2863 Interfaces MIB
    3416 SNMPv2
    3418 SNMP MIB
    ANSI/TIA-1057 LLDP-MED MIB
    IEEE 802.1AB LLDP MIB
    IEEE 802.1AB LLDP DOT1 MIB
    IEEE 802.1AB LLDP DOT3 MIB
    FORCE10-IF-EXTENSION-MIB
    FORCE10-LINKAGG-MIB
    FORCE10-COPY-CONFIG-MIB
    FORCE10-PRODUCTS-MIB
    FORCE10-MS-CHASSIS-MIB
    FORCE10-SMI
    FORCE10-SYSTEM-COMPONEN-MIB
    FORCE10-TC-MIB

    FORCE10-FIPSNOOPING-MIB
    FORCE10-DCB-MIB
    LLDP-EXT-DOT1-DCBX-MIB
    IEEE8021-PFC-MIB
    DELLl_ITA.REV_1_1.MIB

Chassis

  • Single-wide I/O module for M1000e blade enclosure

Environmental Operating Conditions

  • Power supply: 100–240 VAC 50/60 Hz
    Max. thermal output: 955.36 BTU/h
    Max. current draw per system: 2 A at 100/120 VAC, 1 A at 200/240 VAC
    Max. power consumption: 123 Watts
    ISO 7779 A-weighted sound pressure level: 59.6 dBA at 73.4°F (23°C)
    Operating temperature: 32° to 104°F (0° to 40°C)
    Operating humidity: 10 to 85% (RH), non-condensing
    Max. non-operating specifications:
    - Storage temperature: –40° to 158°F (–40° to 70°C)
    - Storage humidity: 5 to 95% (RH), non-condensing

Regulatory

  • UL/CSA 60950-1, Second Edition
    EN 60950-1, Second Edition
    IEC 60950-1, Second Edition Including all National Deviations and Group Differences
    EN 60825-1 Safety of Laser Products Part 1:
    Equipment Classification Requirements and
    User’s Guide Optical Fibre Communication Systems
    FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
    Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
    Canada: ICES-003, Issue-4, Class A
    Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
    Japan: VCCI V3/2009 Class A
    USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
    EN 300 386 V1.4.1:2008 EMC for Network Equipment
    EN 55024: 1998 + A1: 2001 + A2: 2003
    EN 61000-3-2: Harmonic Current Emissions
    EN 61000-3-3: Voltage Fluctuations and Flicker
    EN 61000-4-2: ESD
    EN 61000-4-3: Radiated Immunity
    EN 61000-4-4: EFT
    EN 61000-4-5: Surge
    EN 61000-4-6: Low Frequency Conducted Immunity
    All components are RoHS compliant

    Product Safety, EMC and Environmental Datasheets
    Dell Regulatory Compliance Home Page
    Dell and the Environment
     
close
 
 
CS03