4 Posts
0
1587
Aurora R5, loud and constant fan noise since upgrading CPU
Hello,
I've had an Aurora R5 for some time now, but decided to upgrade it recently.
I replaced the graphic card with a GTX 1660 and everything was fine.
Then, I replaced the CPU from the i5-6400 the computer came with, with an i7-6700K.
Since then, the computer makes a very loud fan noise. The noise is constant, and doesn't change whether the CPU is heavily used (temperatures up to 80°C) or idle (temperatures <40°C).
It doesn't seem to me like an overheating issue, and I have already tried to remove, clean and re-install the CPU fan, with no visible change.
Is there a way to diagnose where the problem comes from, and do I need to change something else in the computer (CPU/case fan, PSU...)?
Thank you in advance.
r72019
6 Professor
6 Professor
•
5.3K Posts
1
August 19th, 2020 05:00
Vrm heatsink pictured below the "corsair" block.
Also, corsair h60 with an ml120 pro is compatible with the 6700k and R5.
"Remove Thermal Liner"
r72019
6 Professor
6 Professor
•
5.3K Posts
0
August 19th, 2020 05:00
Also, you need a vrm heaksink. Dell sold k class processors with a vrm heatsink on the motherboard. I believe with the Aurora R5, non k options did not include the vrm heatsink.
r72019
6 Professor
6 Professor
•
5.3K Posts
0
August 19th, 2020 05:00
Yes, the stock fan cooler cannot support a k class processor, especially a 6700k. The fan/heatsink is only rated for about 65w. You need to upgrade to liquid cooling. Dell did not sell the 6700k with air cooling.
Trogl
4 Posts
0
August 19th, 2020 06:00
Thank you very much!
So, I could install this liquid cooler, but I also need to install heat sinks?
Is it possible/easy to install heat sinks in the aurora r5?
Sorry for all the questions, I have no experience with this!
r72019
6 Professor
6 Professor
•
5.3K Posts
0
August 19th, 2020 07:00
You can get the heatsink on ebay:
https://www.ebay.com/itm/Genuine-Dell-Alienware-Aurora-R7-R6-R5-Liquid-Cooling-Heatsink-J46J2-0J46J2/163751201254?hash=item26205509e6:g:vMYAAOSw3A9dEYks
r72019
6 Professor
6 Professor
•
5.3K Posts
1
August 19th, 2020 07:00
It's just the two screws go into the motherboard, plus you put a thermal pad under the heatsink to help transfer heat.
Trogl
4 Posts
0
August 19th, 2020 07:00
Thank you for the link!
Unfortunately, I am not from the US (I'm in Germany), and would rather avoid ordering something from the other side of the world (especially since it would only arrive in 1-3 months), and I can't find the exact model from Alienware here.
Could I use some of these standard heatsink instead, without the screws but just gluing them with thermal paste?
https://www.conrad.de/de/p/fischer-elektronik-ick-pga-6-x-6-x-14-kuehlkoerper-18-6-k-w-l-x-b-x-h-14-x-14-x-14-mm-181178.html
Thank you so much for your help!
r72019
6 Professor
6 Professor
•
5.3K Posts
1
August 26th, 2020 23:00
Yes, thermal tape plus mini copper mosfet heatsinks are another way to go.