Unsolved
1 Rookie
•
6 Posts
0
2876
June 7th, 2023 09:00
Aurora R6, power button is blinking 4 times orange
The power button is blinking 4 times orange then stopping then repeating. Everything inside the system seems to be getting power and working, the monitor doesn't get a signal so it boots up stays on the power button blinks 4 times and the monitor says no signal. Could anyone help troubleshoot things or help me out at all?
No Events found!


Vanadiel
8 Professor
•
7.1K Posts
•
29.7K Points
0
June 7th, 2023 09:00
If you recently worked inside your computer, try reseating the RAM.
Alternatively, you can try releasing the fleas: Fleas
If that does nothing, try removing the CMOS battery.Coin cell
You might need to replace it with a new one if it's older: Replacing Coin Cell Battery
Trig
1 Rookie
•
6 Posts
0
June 7th, 2023 10:00
ive re seat the ram, ive unplugged the power and held the power button down ive tooken the battery out and held the power button down as well with out it being hooked up to the power still boots up but no signal to the monitor
Trig
1 Rookie
•
6 Posts
0
June 7th, 2023 10:00
could it be i need new cables for the card and monitor or do i need to get new ram, and if it is the battery where can i order a new one?
Trig
1 Rookie
•
6 Posts
0
June 7th, 2023 10:00
will do ill reply after
Trig
1 Rookie
•
6 Posts
0
June 7th, 2023 10:00
tried it all didnt work
ProfessorW00d
6 Operator
•
2.4K Posts
•
10.2K Points
0
June 7th, 2023 10:00
As suggested above . . . replace your CR2032 coin cell battery with a brand new one. They are available at your local grocery store for about $1.39.
ProfessorW00d
6 Operator
•
2.4K Posts
•
10.2K Points
0
June 7th, 2023 11:00
They have them at every grocery store or convenience store . . . and they are very inexpensive.
Trig
1 Rookie
•
6 Posts
0
June 8th, 2023 08:00
I did as you said its still blinking orange 5 times even with the new cmos battery
ProfessorW00d
6 Operator
•
2.4K Posts
•
10.2K Points
0
June 8th, 2023 08:00
So a new battery changed the blink pattern from the original 4 blinks to 5 blinks?
Try clearing CMOS again by removing the CR2032 battery and holding in the power button.