Facing Issues while configuring Atmos.... Please help...

Question

Hello experts, I am facing Issues while configuring Atmos.... Please help...(facing follwing errors Marked in RED) [root@RHEL249 ~]# rpm -ivh kmod-fuse-1.4.1.59250.x86_64.rpm Preparing...                ########################################### [100%]   1:kmod-fuse              ########################################### [100%] [root@RHEL249 ~]# lsanaconda-ks.cfg                   atmos-nfs-1.4.1.59250.x86_64.rpm  install.log         kmod-fuse-1.4.1.59250.x86_64.rpmatmos-ifs-1.4.1.59250.x86_64.rpm  Desktop                           install.log.syslog[root@RHEL249 ~]# rpm -ivh atmos-nfs-1.4.1.59250.x86_64.rpm Preparing...                ########################################### [100%]   1:atmos-nfs              ########################################### [100%] [root@RHEL249 ~]# service mauifs configureEnter Cluster location [Boston]: India1    Enter Tenant ID [58f84f0182f94df38d8f6db37f3d3312]: bf1be972777f40be9b8f2eee5e4700eeEnter SubTenant ID []: cbd9110f0e0542a6b399c1af023b9684                      Enable logging of client loghook(Y/ )?:N Logging of client loghook is disabled. Enter RMS IP Addresses/Hostnames separated by spaces: 10.109.115.241 10.109.115.242 10.109.115.243 Getting Atmos Hosts Information ... ifsadmin@10.109.115.241's password: hosts                                                                                      100%  605     0.6KB/s   00:00    Is the data network configured on Atmos nodes? (Y/ )?:Y Getting Atmos Network Configuration Information ... ifsadmin@10.109.115.241's password: comm_network_cfg.xml                                                                       100% 2039     2.0KB/s   00:00    mauifs is configured successfully.                         [  OK  ] [root@RHEL249 /]# service mauifs startStarting mauifs...                                         [  OK  ][root@RHEL249 /]# cd /mnt/mauifs[root@RHEL249 mauifs]# mkdir dir1mkdir: cannot create directory `dir1': Numerical result out of range[root@RHEL249 mauifs]# touch file1touch: cannot touch `file1': Numerical result out of range [root@RHEL249 mnt]# ls -lhtotal 4.0Kdrwxrwxrwx 2 root root 4.0K May 21 19:06 mauifs [root@RHEL249 mnt]# mount/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)proc on /proc type proc (rw)sysfs on /sys type sysfs (rw)devpts on /dev/pts type devpts (rw,gid=5,mode=620)/dev/sda1 on /boot type ext3 (rw)tmpfs on /dev/shm type tmpfs (rw)none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)fuse on /mnt/mauifs type fuse (rw,nosuid,nodev,acl,allow_other) [root@RHEL249 mnt]# df -hFilesystem            Size  Used Avail Use% Mounted on/dev/mapper/VolGroup00-LogVol00                       11G  3.9G  6.4G  38% //dev/sda1              99M   13M   82M  13% /boottmpfs                 187M     0  187M   0% /dev/shmfuse                  254G  9.4G  231G   4% /mnt/mauifs[root@RHEL249 mnt]# If I try to do all these steps by installing file 'atmos-ifs-1.4.1.59250.x86_64.rpm' then I am getting error while creating directory inside /mnt/mauifs: [root@RHEL250 ~]# cd /mnt/mauifs-bash: cd: /mnt/mauifs: Connection refused Can I ask for an expert advice here?

vipmishal-2I4ZU · Answer

Also Tried... vi /etc/sysctl/confnet.core.rmem.max=4194304net.core.wmem.max=4194304 sysctl -p and  i hv tried installing Atmos installable file on RHEL5.2-64 bit, 5.3-64bit, 5.3-32 bit. Still facing t same problem.

vipmishal-2I4ZU · Answer

can someone help here please?

vipmishal-2I4ZU · Answer

Thansk Mike for your responce.  I will try... Just wondering  is it required to have two RMGs...?will the one RMG do?

Atmos

Was this post helpful?