Any system where multiple nodes have gone offline concurrently will need to be rolled back to the most recently created checkpoint. This can be done using the "dpnctl" utility.
I was able to use the --help and figured out what I needed to do, however I have this now, and this is the node that was offline, upon review the idrac6 in it has crashed and is not recoverable, anyway around it? Last I check the system was booting but was stuck at start ipmi drive.
dpnctl: INFO: Checking that gsan was shut down cleanly... dpnctl: ERROR: problem running command "export SYSPROBEUSER=admin && /usr/local/avamar/bin/mapall --noerror --givestatus 'export PATH=.:~admin:/usr/local/avamar/bin:$PATH ; (gsan isclean ; echo $? >/tmp/dpnctl-gsan-isclean-status-9930) >/tmp/dpnctl-gsan-isclean-output-9930 2>&1' >/tmp/dpnctl-mapall-output-9930 2>&1" - exit status 1 dpnctl: ERROR: missing gsan "isclean" status information from node "0.4" dpnctl: ERROR: unable to determine "isclean" status of gsan - some nodes did not report, or else did not report as expected dpnctl: ERROR: traceback on exit: main::gsan_is_clean (/usr/local/avamar/bin/dpnctl line 2062) main::gsan_restart (/usr/local/avamar/bin/dpnctl line 3176) main::dpn_up (/usr/local/avamar/bin/dpnctl line 5151) main::handle_top_level_command (/usr/local/avamar/bin/dpnctl line 6198)
dpnctl: ERROR: [user "admin"] program exit status = 1 (error)
ionthegeek
2 Intern
•
2K Posts
0
November 16th, 2020 12:00
Any system where multiple nodes have gone offline concurrently will need to be rolled back to the most recently created checkpoint. This can be done using the "dpnctl" utility.
ETTech
3 Posts
0
November 16th, 2020 12:00
would you mind if I asked what the steps are for that? Or a run down of it?
ETTech
3 Posts
0
November 16th, 2020 15:00
I was able to use the --help and figured out what I needed to do, however I have this now, and this is the node that was offline, upon review the idrac6 in it has crashed and is not recoverable, anyway around it? Last I check the system was booting but was stuck at start ipmi drive.
dpnctl: INFO: Checking that gsan was shut down cleanly...
dpnctl: ERROR: problem running command "export SYSPROBEUSER=admin && /usr/local/avamar/bin/mapall --noerror --givestatus 'export PATH=.:~admin:/usr/local/avamar/bin:$PATH ; (gsan isclean ; echo $? >/tmp/dpnctl-gsan-isclean-status-9930) >/tmp/dpnctl-gsan-isclean-output-9930 2>&1' >/tmp/dpnctl-mapall-output-9930 2>&1" - exit status 1
dpnctl: ERROR: missing gsan "isclean" status information from node "0.4"
dpnctl: ERROR: unable to determine "isclean" status of gsan - some nodes did not report, or else did not report as expected
dpnctl: ERROR: traceback on exit:
main::gsan_is_clean (/usr/local/avamar/bin/dpnctl line 2062)
main::gsan_restart (/usr/local/avamar/bin/dpnctl line 3176)
main::dpn_up (/usr/local/avamar/bin/dpnctl line 5151)
main::handle_top_level_command (/usr/local/avamar/bin/dpnctl line 6198)
dpnctl: ERROR: [user "admin"] program exit status = 1 (error)