This post is more than 5 years old
2 Intern
•
360 Posts
0
11879
March 20th, 2010 21:00
how to change Avamar server IP
Dear All,
I tried to change Avamar server IP, and many sreviced not started.
Could you point out what is the correct way to do that?
Thank you,
Dennis Dai
No Events found!
Avamar Exorcist
462 Posts
0
March 22nd, 2010 04:00
First of all, reverse the changes you made to the system.
When the system is working again you can change the network configuration depending on what type of Avamar system it is:-
For a Single node system you can use the 'resite' procedure documented in the Avamar system administration guide.
For a multi-node system use the document "Changing the Name and IP Addressing of Avamar Systems Avamar 3.7.1 or Later Technical Note" found on Powerlink in Home > Support > Technical Documentation and Advisories > Software ~ A-B ~ Documentation > Avamar > Technical Notes
hulbertmike
3 Posts
1
February 5th, 2015 12:00
Is this the simplest way to change the IP on an Avamar? Seems rather confusing for a simple change.
hulbertmike
3 Posts
0
February 5th, 2015 13:00
Thanks so much for the reply. I will give it a try.
Nayaks1
77 Posts
0
February 5th, 2015 23:00
As Brad pointed out, be very careful with the steps and keep a track of what steps are over. So in case.....just in case of any issues. you can always revert the changes.
JWeinsheimer
91 Posts
0
February 6th, 2015 05:00
It's also worth noting that the "latest" procedure isn't up to date and you'll likely encounter prompts or output that aren't documented in the proc.
ionthegeek
2 Intern
•
2K Posts
1
February 6th, 2015 07:00
The post-install networking document is intended for tasks like configuring additional VLANs. It is not intended to cover the (relatively simple) re-IP case.