what kind of array and flare is it running ? Do you see any related errors/messages around the time you create these LUNs ? Do you select auto-assing when you create new LUN or you select specific SP as the owner ?
Also check to see if you are using VMWare - the failover policy of MRU will cause the LUNs to all end up on one SP if one of the SP's is rebooted or if you perform a code upgrade (NDU).
dynamox
9 Legend
•
20.4K Posts
0
November 22nd, 2009 09:00
igarcia1
43 Posts
0
November 22nd, 2009 13:00
Hi dynamox,
Yes, i can tresspass manually the LUN without problems, but i can't understand the reason why tresspas starts when i create the LUN.
Moreover, the LUN gets too long time to be bind.
It's extrange.
dynamox
9 Legend
•
20.4K Posts
0
November 22nd, 2009 16:00
what kind of array and flare is it running ? Do you see any related errors/messages around the time you create these LUNs ? Do you select auto-assing when you create new LUN or you select specific SP as the owner ?
kelleg
4 Operator
•
4.5K Posts
0
November 30th, 2009 13:00
Also check to see if you are using VMWare - the failover policy of MRU will cause the LUNs to all end up on one SP if one of the SP's is rebooted or if you perform a code upgrade (NDU).
glen