Unsolved
This post is more than 5 years old
71 Posts
0
8049
how to see serial number hard disk in cx4-120 array?
Good afternoon, as soon as possible in the Navisphere Manger to see the serial numbers of the form BE000000000000? the fact that there are 28 arrays, there is no staff flew out on some hard disks. A need to order a new number.
Madhug1
127 Posts
0
April 24th, 2012 09:00
Hi,
To order a new drive, you need to have TLA part number.
you can check and get the TLA part number of the drive from Navisphere by expanding the Array
Physical > Expand your DAE (Disk Array Enclosure) > Select the required drive > Properties
where you can see the TLA part number of the drive. (Example: 005048198)
In the properties window, you can also find the serial number of the drive, but to order a new drive, TLA part number is required.
Thanks
Madhu
ALEX_SERYOGIN
71 Posts
0
April 24th, 2012 09:00
Yes thanks, I know how to find part number TLA number, I do not know how to find the serial number of the disk type, for example BE104095116127, which is indicated on the front of the disk at the bottom. That is, for RMA form does not require a prerequisite to specify the disk serial number?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 24th, 2012 13:00
maybe it's in the output from this command ?
naviseccli -h getdisk -tla -all
kelleg
4.5K Posts
0
April 25th, 2012 07:00
If you have access to Navisphere or Unipshere, find the physical disks, right click on the disk and select Properties - this will show the serial number and the TLA part number.
If you use naviseccli - use the
naviseccli -h IP_Address getdisk -tla -serial - this will give you all the disks
naviseccli -h IP_Address getdisk 0_0_0 -tla -serial - this will give you disk 0_0_0 Bus_enc_disk
glen
Sheron1
224 Posts
0
May 7th, 2012 10:00
There you go...
A screenshot of what Ganesh was trying to convey