Unsolved
This post is more than 5 years old
13 Posts
0
1226
October 13th, 2008 23:00
iSCSI connection to Server where HDLM installed.
I have a Question regarding Clariion CX3-10.
I have a CX3-10c. I need to connect a server to that Clariion CX3-10c through iSCSI. But the server is already connected to the a HITACHI san box through FC and they have Hitachi multipathing software (HDLM) installed on the server.
My question is that whether HDLM Software will detect the data paths from CX3-10c?
can I connect the server to the Clariion without installing Power Path.
the server has Windows 2003 Enterprise edition 32bit R2 with Service Pack 1.
I have a CX3-10c. I need to connect a server to that Clariion CX3-10c through iSCSI. But the server is already connected to the a HITACHI san box through FC and they have Hitachi multipathing software (HDLM) installed on the server.
My question is that whether HDLM Software will detect the data paths from CX3-10c?
can I connect the server to the Clariion without installing Power Path.
the server has Windows 2003 Enterprise edition 32bit R2 with Service Pack 1.
No Events found!
cool89
13 Posts
0
October 14th, 2008 02:00
actually my customer doesnt require both management software on the server. they have HDLM already installed. so they want to know whether it can see data paths from clariion.
as the server is already connected to Hitachi san and they dont want to touch that. and they want some space from Clariion also.
so i need to know if i can connect clariion without installing powerpath and HDLM should see the data paths,
what is the best for that.?
regards
Rohit
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 14th, 2008 02:00
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 14th, 2008 02:00
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=18964&prodSeriesId=1158204
I have ran both on the same box without issues. Make sure you have the latest HDLM and the latest PowerPath ..they will both co-exist just fine.
cool89
13 Posts
0
October 14th, 2008 03:00
thanks for your immediate reply
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 14th, 2008 04:00
Mosa3lyan
2 Intern
•
265 Posts
0
October 14th, 2008 04:00
Mosa3lyan
2 Intern
•
265 Posts
0
October 14th, 2008 09:00
for PowerPath iSCSI , no load balancing just fail over
cool89
13 Posts
0
November 13th, 2008 03:00
i got the answer
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
January 11th, 2012 18:00
what is the output from "ioscan -FnC disk"