Unsolved
This post is more than 5 years old
125 Posts
0
464
multipath for iscsi
i have a vmware ESX host with only one phy NIC connect to a CX3-20c. in ESX, i must manually connect to each port on SPA and SPB. is there any method that i can connect only one portal IP then EMC array will know all path beneath it?
kelleg
4.5K Posts
1
October 12th, 2009 07:00
If you have only one physical NIC in the server, you should connect to ONLY two ports on the array - one to SPA and one to SPB, if you connect all the ports you could overload the iSCSI NIC.
glen