Unsolved
This post is more than 5 years old
1 Message
0
7411
Compellent SC4020 Serial converter - RJ45
Hi Everyone, I have several SC4020's in remote sites that I would like connect the serial port to a RJ45 converter and connect the Compellent to an Opengear console server. Has anyone ever done this? Is there a 3mm to RJ45 converter out there that works? I see quite a few out on in the market but dont know if they're the correct pinouts.
petermie
16 Posts
0
June 30th, 2017 10:00
If you mean RJ45 like a Cisco rollover cable, you can just make an adapter for you existing cable with something like this and use a straight through ethernet cable for the connection. I did it a ton for serial dongles in the past with no issues, as long as you know the pinout it's a snap.
https://www.amazon.com/StarTech-com-Serial-adapter-DB-9-RJ-45/dp/B00006IRQA/
CompellentSanAd
43 Posts
0
July 11th, 2017 19:00
The Dell Part number is 5WD20. It is a DB9 to 3.5 mm cable, and one should have been supplied with each system you purchased. Or you can buy aftermarket cables:
www.amazon.com/.../B01MYXA3C2