Thanks for the reply. I figured out the problem. I needed to add an FCoE rule esxcli storage nmp satp rule add --transport fcoe --satp VMW_SATP_DEFAULT_AA --description "Fibre Channel over Ethernet Devices" I neglected to make note that I did that on the first build and completely forgot. Once I added this the existing an new LUNs all show the expected storage array type and path selection.
bproteau
10 Posts
1
May 30th, 2013 09:00
Thanks for the reply. I figured out the problem. I needed to add an FCoE rule esxcli storage nmp satp rule add --transport fcoe --satp VMW_SATP_DEFAULT_AA --description "Fibre Channel over Ethernet Devices" I neglected to make note that I did that on the first build and completely forgot. Once I added this the existing an new LUNs all show the expected storage array type and path selection.
hallidayr
48 Posts
0
May 27th, 2013 12:00
Not sure WHY that would've happened but do you have any luck if you run
esxcli storage nmp satp set --default-psp VMW_PSP_RR --satp VMW_SATP_LOCAL