This post is more than 5 years old
4 Posts
0
13442
EMC DS-16B2 login problems
Hello,
I have an EMC DS-16B2 that I bought used and the previous owner changed the default login and passwd. The problem, I have a great switch which I cannot log into. Question, how do I reset the switch back to default settings? (factory settings)
Thks,
Ron
I have an EMC DS-16B2 that I bought used and the previous owner changed the default login and passwd. The problem, I have a great switch which I cannot log into. Question, how do I reset the switch back to default settings? (factory settings)
Thks,
Ron
RitaWorkman
20 Posts
0
September 24th, 2007 12:00
Have you tried using Ctrl-c to bypass
I will presume you only have that one switch. Have you tried to connect using the serial port and see if that will allow you to interupt the Autoboot and possibly reset the passwd at that point with the command (much like UNIX boxes).
Never had this particular problem, so these are just a couple thoughts.
Rgrds,
rcw
mpi2
2 Intern
2 Intern
•
215 Posts
0
August 7th, 2007 02:00
For EMC switches there is a default root password set. Maybe an EMC employee can post that password.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
August 7th, 2007 02:00
mpi2
2 Intern
2 Intern
•
215 Posts
0
August 7th, 2007 02:00
mpi2
2 Intern
2 Intern
•
215 Posts
0
August 7th, 2007 02:00
Solaris10
4 Posts
0
August 7th, 2007 05:00
I tried that too..but didnt work.
Ron
Solaris10
4 Posts
0
August 7th, 2007 05:00
I will try this one and let everyone know if it works.
Ron
Solaris10
4 Posts
0
August 8th, 2007 10:00
Here is the boot process:
VxWorks System Boot
Copyright 1984-1994 Wind River Systems, Inc.
CPU: i960
Version: 5.3.1
BSP version: 1.0
Creation date: Tue Mar 5 10:56:29 PST 2002
Press any key to stop auto-boot...
0
auto-booting...
host name : host
file name : /usr/switch/firmware
inet on ethernet (e) : 10.77.77.77:ffffff00
user (u) : user
flags (f) : 0x0
target name (tn) : EV020072562
Attaching network interface fei0... Link down: bad or missing cable?
done.
Attaching network interface lo0... done.
Boot 0: booting from flash 0
Boot 0: 110528+6408
Boot 0: uncompressed - loading text and data
Boot 0: starting at 0x10030000...
Loading compressed image from flash...
Boot 0: booting from flash 0
Boot 0: 110528+6408
Boot 0: compressed
Boot 0: uncompressing 2784693 bytes from flash at 0xc005c918
Boot 0: jumping to RAM at 0x10400000
Attaching network interface fei0... Link down: bad or missing cable?
done.
Attached TCP/IP interface to fei unit 0
Attaching network interface lo0... done.
telnetInit: telnetd initialized.
NFS client support not included.
efwHookAdd: Added Ethernet Hook
Adding 10993 symbols for standalone.
Model: 17
0x1033cff0 (tSwitch): Jan 28 01:45:34
INFO SYS-BOOT, 4, Restart reason: Power-on
Fabric OS (tm) Release v3.2.0a
login: hpInit: Looking for Help Pages in Flash
Help Pages Info Start at 3046f9
*then the OS login prompt appears: "which is where I'm STUCK!
Thanks to those how have helped
Ron