Unsolved
This post is more than 5 years old
1 Message
0
706
communication switches logan distance
I am 02 switch brocade 6510B (Serial Number BRCBRW1903J007 OEM and OEM Serial Number BRCBRW1903J003) and this switch must communicate through CWDM in another location with brocade switch 5100B. We would like to know which gbic approved for this type of communication (manufacturer and model).
Thank you very much.
christopher_ime
2K Posts
0
December 20th, 2013 15:00
Firstly, welcome to the forums, and above all, thank you for being an EMC customer.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Infrastructure Connectivity Support Forum".
Infrastructure Connectivity Support Forum
felipon1
96 Posts
0
December 27th, 2013 01:00
Hi,
I have attached the Brocade SFP matrix where you can see the SFP models supported by each of the switchs. On the other hand, the SFP to use in your environment depends on the CWDM device because this dev will be the one directly connected to each switch. What SFPs does the CWDM device have? You have to use a SFP with the same characteristics on the switchs.
Rgds
1 Attachment
Brocade_SFP_Matrix_2013.pdf