FAQ / CSI Driver for PowerMax

Question

To which CSI driver PowerMax version does this FAQ apply? This FAQ applies to version 1.4 of the CSI Driver for PowerMax What's new with 1.4 ? * Support for beta snapshots* Support for online Volume expansion* Support for raw block volumes* New CSI PowerMax Reverse Proxy service* New installation scripts* Kubernetes 1.17, 1.18, 1.19 support* Openshift 4.4 support* RHEL 7.8 support Which CSI version driver conforms to? The driver works with Kubernetes 1.17, 1.18 and 1.19 with the CSI specification 1.1. The CSI interface enabled What are the supported features? The following table lists the supported action to manage the lifecycle of a PowerMax volume handled with the CSI driver. Action Supported (version) Static Provisionning yes Dynamic Provisionning yes Binding yes Retain Reclaiming yes Delete Reclaiming yes Recycle Reclaiming no Expand Persistent Volume yes Shrink Persistent Volume no Create Snapshot Volume yes Create Volume from Snapshot yes Delete Snapshot yes CSI Volume Cloning yes CSI Raw Block Volume yes CSI ephemeral volumes no How do I access different array or storage pool ? It is possible to create multiple Kubernetes StorageClass to access different arrays, storage pools, or service levels. If different arrays are managed by different Unisphere, you can install a new instance of the driver in a different namespace to access each Unisphere. What are the supported protocols ? The supported protocol to access PowerMax storage are iSCSI and Fiber Channel. What are the known limitations? The driver does not support topology (VOLUME_ACCESSIBILITY_CONSTRAINTS) ; this means a volume is seen by a single host at a time.The driver does not support both iSCSI and FC connectivity for a single node. How do I set up the PowerMax CSI driver? The CSI driver can be installed with the installation scripts provided (with helm) or with the dell-csi-operator. The operator is available directly from Openshift OperatorHub UI. For other distributions, you can download it from operatorhub.io. For ease of installation, we recommend using the dell-csi-operator. If you want to have more control over the components helm is more open. The details of each installation methods are documented in the product guide A video showing the Operator usage in context CSI Isilon is viewable here : (https://www.youtube.com/watch?v=l4z2tRqHnSg&list=PLbssOJyyvHuVXyKi0c9Z7NLqBiDiwF1eA&index=6) How to install the Snapshot beta ? With support for beta volume snapshot, the installation process changed. They are now 2 extra steps: Install the Volume Snapshot Controller with kubectl create -f https://raw.githubusercontent.com/kubernetes-csi/external-snapshotter/release-2.1/deploy/kubernetes/snapshot-controller/rbac-snapshot-controller.yaml &&  kubectl create -f https://raw.githubusercontent.com/kubernetes-csi/external-snapshotter/release-2.1/deploy/kubernetes/snapshot-controller/setup-snapshot-controller.yaml Install the beta CRD either independently with kubectl create -f dell-csi-helm-installer/beta-snapshot-crd or with the csi-install.sh --snapshot-crd The step1. is because the CSI external-snapshotter sidecar has been split into two controllers, a commonsnapshot controller and a CSI external-snapshotter sidecar. The step How to uninstall the CSI driver? Like for the installation, you can uninstall the driver with helm:helm delete POWERMAX_RELEASE [--purge] Or execute the script:sh ./csi-uninstall.sh --namespace powermax --release powermax  For Operator deployments you can run :  kubectl delete powermax/ -n How to upgrade the CSI driver? If you come from an installation with helm v2. You have to uninstall then reinstall the driver with helm v3 : Uninstall the driver using the latest uninstall.powermax script Make sure helm binary point to helm v3 Install the driver using the latest install.powermax script and the new myvalues.yaml file If you come from an installation with helm v3 : run the ./csi-install.sh --upgrade script If you deployed with the dell-csi-operator : Edit with the Openshift UI or kubectl edit the CSIPowerMax image to image: 'dellemc/csi-powermax:v1.4.0.000R' What are the pre-requisites for CSI driver installation? To check your system complies with the pre-requisites, you can execute the script sh verify.kubernetes The exhaustive list of pre-requisites is given in the product guide. Which k8s distributions are supported? The supported versions are upstream Kubernetes 1.14, 1.16 and OpenShift 4.2, 4.3. What operating systems are supported? The supported OS is Red Hat Enterprise Linux 7.6, 7.7 and 7.8 What PowerMax and Unisphere version are supported?The driver 1.2 supports 5978.221.221 (ELM SR), 5978.444.444 (Foxtail), 5978.479.479 (Foxtail SR) & future Hickory with Unisphere 9.0 and 9.1 Note: 1.0 driver is not compliant with Unisphere 9.1. Make sure that before upgrading your Unisphere from 9.0 to 9.1, you upgrade the CSI driver from 1.0 to 1.2 How to troubleshoot the driver? The driver can be troubleshooted using the usual kubectl commands as any other k8s pod/resources.Most often used commands are : kubectl get pods -n powermax : gives the status of the controller and drivers on every node kubectl describe pods powermax-controller-0 -n powermax : provides details on the deployment for the controller kubectl logs powermax-controller-0 -n powermax -c driver : logs the API calls between the driver and Unisphere Which driver version is installed? helm list -c POWERMAX_RELEASE What version and model of PowerMax versions are supported? CSI Driver interacts with Unisphere API for all the features (volume creation, reclamation, etc.). The driver supports the Unisphere version 9. Where do I submit an issue against the driver? Dell EMC officially supports the PowerMax driver. Therefore you can open a ticket directly to the support website : https://www.dell.com/support/ or open a discussion in the forum : https://www.dell.com/community/Containers/bd-p/Containers: Can I run this driver in the production environment? Yes, the driver is production-grade. Please make sure your environment follows the pre-requisites and kubernetes best practices. What support Dell EMC provides for the driver built on GitHub? Dell EMC is fully committed to support the driver image on Dockerhub built from the sources hosted on GitHub. Do I need to have programming skills to use CSI driver? No. To use the driver, you need to have basic knowledge around kubernetes administration (How to create a PV, How to use a Volume, etc.). How can connect Dell EMC storage to Kubernetes running on VMWare? If you choose to host your cluster on a virtualized environment the preferred protocol is iSCSI. What do I do if I discover an issue with the code on the GitHub? Please open a ticket a discussion in : https://www.dell.com/community/Containers/bd-p/Containers

UELIFE · Answer

Does this CSI Driver for PowerMax support SRDF/Metro?

Flo_csI · Answer

Hi UELIFE, There is no support for SRDF/Metro from the driver yet. It is indeed an excellent use-case for Geo distributed Kubernetes cluster.   Rgds.

AlexS123 · Answer

Hi Flo_csl, Do we know when we are looking to provide support for SRDF/Metro in the driver?

From what I can see, it would be possible for us to use statically provisioned volumes with SRDF/Metro with Geo-distributed clusters. Is that right?

Flo_csI · Answer

Hi @AlexS123,There is no built-in support for SRDF/Metro in the CSI driver today.You are right static provisioning is the solution to expose a LUN to a distant node of the cluster.I will be very interested in discussing with you in more detail your use-case; feel free to contact me directly in PM.

Mason Choi · Answer

Is it compatible with vmax250 storage? If not, do you have any plans to support vmax csi driver?

bmcfeeters · Answer

Hi Mason,

The CSI driver for PowerMax/VMAX is based on the operating environment running on the array and version of Unisphere. Per the ESSM the VMAX 250F model is able to run the required PowerMax OS 5978.221.221 & 5978.444.444 and is therefore supported.

Thanks
Bryan

Flo_csI · Answer

Bump v1.3

Flo_csI · Answer

Update for 1.4 release

Containers

Was this post helpful?