Unsolved
This post is more than 5 years old
6 Posts
0
3057
May 9th, 2018 08:00
Firmware Baseline Not Showing For Server
Hi All,
Having a strange problem here. For one reason another I have some servers out of a group of 20 or so that will not show a firmware baseline available from the drop down menu option, while others will.
I have removed these servers from the inventory, ran a rediscover job to re-detect them, ran and reran inventory jobs on them, restarted the OE services as well as restarting the appliance. Regardless, these servers will not allow me to choose a firmware baseline. They are all R730's.
Any thoughts or ideas on why some will work and others will not?
No Events found!
121xx
6 Posts
0
May 9th, 2018 09:00
Hi Rob,
Thanks for your reply and suggestions. I was just coming back to update this to say I discovered the problem.
I am not sure how I missed this, but the first baseline I was using and working from was only assigned to a very small group of the servers that I had created via a custom query. I am not sure how I missed this. Well, actually yes I do. I did not pay enough attention to the doughnut on the right side of the screen indicating the number of groups / devices the policy was assigned against.
DELL-Rob C
4 Apprentice
•
2.8K Posts
0
May 9th, 2018 09:00
Ok, cool. Thanks for taking time to update the post. I'm sure someone else will run into this as well, so it will help them out :)
Regards,
Rob
DELL-Rob C
4 Apprentice
•
2.8K Posts
0
May 9th, 2018 09:00
Hi and thanks for the post.
As an experiment, if you create a _new_ baseline and then add one of these servers in it, does it work that way?
Thanks,
Rob