Unsolved
This post is more than 5 years old
6 Posts
0
7072
March 5th, 2013 07:00
Attempt to update Bios to same version
Hi All,
OME 1.1.1
When trying to deploy updates from OME system Update it tells me the update is not needed but then the system never moves over to the Compliant tab. This is happening on a few different servers. I have enabled and disabled downgrades but this did not help.
Thank you,
Todd
PackageCode 0
PackageFileName C:\DOCUME~1\ADMINI~1.FCC\LOCALS~1\Temp\s124\PER200_BIOS_WIN_1.4.3.EXE
PackageLog << PACKAGE LOG (SelfExtractable) >>
me as the currently installed version.
Software application name: BIOS
Package version: 1.4.3
Installed version: 1.4.3
Executing update...
==============================> Update Result <==========================
Attempt to update BIOS or firmware to the same version.
Update was unnecessary and not applied
=========================================================================
Exit code = 0 (Success)
2013-03-04 07:32:32
<< PACKAGE LOG (SelfExtractable) >>
======> Update Package application started <===============
Command: C:\DOCUME~1\ADMINI~1.FCC\LOCALS~1\Temp\s124\PER200_BIOS_WIN_1.4.3.EXE
Date: 2013-03-04 07:32:33
=========================================================================
PackageReleaseId Not Available
PackageState complete
PackageStatus 2
PackageCode 0
PackageFileName C:\DOCUME~1\ADMINI~1.FCC\LOCALS~1\Temp\s124\PER200_BMC_FRMW_WIN_R219074.EXE
PackageLog ===============> Update Package application started <===============
Command: C:\DOCUME~1\ADMINI~1.FCC\LOCALS~1\Temp\s124\PER200_BMC_FRMW_WIN_R219074.EXE /f /s /l=C:\WINDOWS\TEMP\DUP.log
Date: 2013-03-04 07:32:23
=========================================================================
Release ID: R219074
Update Package version: 6.5.0 (BLD_19)
User: FCC\Administrator
Collecting inventory...
Running validation...
The version of this Update Package is the same as the currently installed version.
Software application name: BMC
Package version: 1.83
Installed version: 1.83
Executing update...
==============================> Update Result <==========================
Attempt to update BIOS or firmware to the same version.
Update was unnecessary and not applied
=========================================================================
Exit code = 0 (Success)
2013-03-04 07:32:25
PackageReleaseId Not Available
PackageState complete
PackageStatus 2
TotalStatusMessage Software update complete.
0 events found
DELL-Rob C
4 Apprentice
•
2.8K Posts
0
March 5th, 2013 08:00
Hi Todd,
It seems like the inventory has not gotten properly updated. Can you delete one of the devices from the tree and re-discover? That's the only thing I can think of at this point.
thx.
Todd_Saettele
6 Posts
0
March 5th, 2013 08:00
Thank you for your response Rob. I should have mentioned that this install is only a few months old and I am just trying to feel my way through. I just started playing with the System Updates a couple of weeks ago but I have kicked off this install on this box a few times in the past week. Initially it had several updates but it is just these two updates that remain. I have manually run the inventory and I run a scheduled inventory every day. I have power cycled this box a few times as well.
At this point I am monitoring 15 servers with ome, 7 are compliant and 8 are not.
Current Catalog is the latest from ftp.dell.com/.../catalog.cab
Thank you again,
Todd
DELL-Rob C
4 Apprentice
•
2.8K Posts
0
March 5th, 2013 08:00
Hi there and thanks for the post.
There may be a 15 minute delay before inventory is re-run on the system. You can also, right-click on the device and manually run inventory from the device tree. Or run inventory from the discovery range.
can you check this?
thx!
Rob
Todd_Saettele
6 Posts
0
March 5th, 2013 12:00
Thanks again Rob,
Deleting, Discovering and re-inventorying worked a treat!
I will have to do this with the others,
Todd