This post is more than 5 years old
3 Posts
0
28894
March 11th, 2012 10:00
Dell Inspiron 560 CPU Upgrade HELP!
I recently bought an Intel Pentium 4 Dual Core 3.2ghz/1m/800 for my Dell Inspiron 560 with motherboard model 018D1Y. I currently have an Intel Celeron 450 right now. I have a 775LGA Socket. When I put the new processor in, the power light stays a steady amber, and will not boot up. I've read that the Intel Pentium 4 Dual Core is compatible. BIOS are the newest version as well. Any help???? Thanks.
No Events found!
shesagordie
12 Elder
•
46K Posts
1
March 11th, 2012 13:00
tstephani wrote:-
"The spec number is sl7j7 I think. Yes, computer works fine with original CPU"
The SL7J7 is a Socket LGA775 P-4, 3.20GHz, 540 Prescott, single core with Hyper-Threading technology and is not compatible with the Inspiron 560.
The following is a list of compatible processors:-
Conroe Kit, E4300, 1.80G, 2MB, 800FSB, L2
Conroe Kit, E4400, 2.00G, 2MB, 800FSB, L2
Conroe Kit, E6320, 1.86G, 4MB, 1066FSB, B2
Conroe Kit, E6420, 2.13G, 4MB, 1066FSB, B2
Conroe Kit, E6550, 2.33G, 4MB, 1333FSB
Conroe Kit, E6750, 2.66G, 4MB, 1333FSB, G0
Conroe Kit, E6850, 3.00G, 4MB, 1333FSB, G0
Conroe XE Kit, X6800, 2.93G, 4MB, 1066FSB, B2
Kentsfield Quad Core Kit, Q6600, 2.40G, 8MB, 1066FSB, G0
Kentsfield Quad Core Kit, Q6700, 2.66G, 8MB, 1066FSB, G0
Kentsfield Quad Core Kit, QX6700, 2.66G, 8MB, 1066FSB, B3
Kentsfield Quad Core Kit, QX6800, 2.93G, 8MB, 1066FSB, G0
Kentsfield Quad Core Kit, QX6850, 3.00G, 8MB, 1333FSB, G0
Yorkfield Quad Core Kit, QX9300, 2.5G, 6MB, 1333FSB, M1
Yorkfield Quad Core Kit, Q9450, 2.66G, 12MB, 1333FSB, C1
Yorkfield Quad Core Kit, Q9550, 2.83G, 12MB, 1333FSB, C1
Yorkfield Quad Core Kit, QX9650, 3.0G, 12MB, 1333FSB, C0
Yorkfield Quad Core kit, QX9650, 3.0G, 12MB, 1333FSB, C1
Wolfdale Dual Core kit, E7200, 2.53, 3MB, FD, 65W,M0
Wolfdale Dual Core Kit, E8200, 2.66G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core Kit, E8300, 2.83G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core Kit, E8400, 3.0G, 6MB, 1333FSB, 65W, C0
Wolfdale Dual Core Kit, E8500, 3.16G, 6MB, 1333FSB, 65W, C0
Bev.
shesagordie
12 Elder
•
46K Posts
0
March 11th, 2012 12:00
tstephani
Sounds like the 'Intel Pentium 4 Dual Core 3.2ghz/1m/800' is not compatible with the inspiron 560.
Have you tried reinstalling the Celeron 450 and see if the 560 boot's up and run?
What is the sSpec number of the P-4 Dual Core 3.2ghz/1m/800 processor?
Bev.
tstephani
3 Posts
0
March 11th, 2012 13:00
My mistake, it is a Pentium 4 D 3.2ghz
tstephani
3 Posts
0
March 11th, 2012 13:00
The spec number is sl7j7 I think. Yes, computer works fine with original CPU.
Kelbear1
1.5K Posts
0
March 11th, 2012 13:00
I don't think I have heard of a Pentium 4 Dual Core. There are Pentium D's which would probably work, but Pentium 4's will not work and be worse than your Celeron 450 performance wise.