Unsolved
This post is more than 5 years old
2 Posts
0
14468
August 29th, 2008 07:00
Power supply for XPS 730
Hi,
I'm looking for a new power supply for the 730 XPS so I can run a pair of 280GTX's. I was wonderying if anyone has any ideas of what power supply I can use, or if I can use 6 pin to 8 pin converter's and if so where can I can acquire them. Money is no problem
thanks.
No Events found!


SR45
2 Intern
•
12.1K Posts
0
August 29th, 2008 09:00
The 730 comes with a stock 1K (1,000 watt ) power supply. Enough for the two cards which in my opinion zone135 is a waste of good money for about a 30% percent gain in frame rates if you do not mind me weighing in with my opinion. Get the one card, then if games suffer, get another one next year that will replace the 280 as they always do.
My older 8800 GTX card of 16 months ago can play any game out their with the exception of Crysis, and Flight Sim X game. No card, even SLI GTX 280's can play those games at max settings either so give this expensive upgrade another thought unless you have money to burn. Also, there are some games that do not play well with SLI and some driver issues have been reported as well.
SR45
2 Intern
•
12.1K Posts
0
August 29th, 2008 17:00
Davet50
6 Operator
•
14.4K Posts
0
August 29th, 2008 17:00
SR45
2 Intern
•
12.1K Posts
0
August 29th, 2008 17:00
Checked a few other forums and some have used a good 750 to 850 watt power supply for two GTX280's and some mentioned it would have to be a good power supply, not one of those fly by night ones.
However, I would not even consider two expensive cards just for a 30% increase in frame rates. Then as time goes by, a brand new more powerful card comes out, just one, that will beat out two GTX 280's as has been noticed with older SLI set ups. Nope. Not worth it plus the headaches
Davet50
6 Operator
•
14.4K Posts
0
August 29th, 2008 18:00
zone135
2 Posts
0
August 29th, 2008 21:00
I have a 1k power supply but the problem is it has no 8 pin connector. I was wonderying if you know of any that i can get which have them?? if the 280 needs an 8 pin connector then most of them in the future will probably as well. Can i use a 6pin ot 8 pin converter or do i need new power suplly with 8pin connectors?
Davet50
6 Operator
•
14.4K Posts
0
August 30th, 2008 01:00