Unsolved
This post is more than 5 years old
35 Posts
0
3703
Precision T7500 2nd CPU Riser
I have a Precision T7500 workstation. I am looking at adding the 2nd CPU Riser Dell Part # H236D with Heatsink & Fan. Do I need anything else for the upgrade? I thought there was a rear fan or something that also has to be replaced when adding 2nd CPU riser but not sure. Also I see the riser has 2 plugs (pictured below), I'm assuming those plug into the stock power supply?
speedstep
9 Legend
9 Legend
•
47K Posts
1
August 13th, 2016 18:00
They don't plug Directly into the stock power supply there is a Riser Power cable that goes to proprietary connector R622G on the power supply.
You can see the cable tucked away on the left side. There is also a plastic piece "RISER GUIDE" and fan assembly.
joedella
35 Posts
0
August 14th, 2016 22:00
OK, I see after your reply and physically looking at my machine.
Do you remove the Fan/Heatsink on the motherboard that I have circled in red when you install the 2nd CPU riser?
speedstep
9 Legend
9 Legend
•
47K Posts
1
August 15th, 2016 05:00
No you don't touch that it sits underneath.
joedella
35 Posts
0
August 15th, 2016 08:00
Great. So if I get the complete riser with the fan and heatsink I don't need to buy anything else?